Venetian Blind brackets come with various holes, allowing you to fit inside the interlude, outside the interlude, into the ceiling, or into the wall. In the steps below and in the video, the blinds will be fitted to the ceiling inside the interlude, but the process is similar for the other positions.

No need to be afraid to fix your blind one alone. Follow our instructions exactly.

After you have measured your blinds, make sure you have all the tools you need to install them, such as a pencil, drill bit, screwdriver, measuring tape, the level meter only, and a height-adjustable ladder.

01

Whether you choose an interior or exterior fixture, the installation instructions are the same:

First of all, look at the bracket for the Venetian blind we have given you and decide where to mount it. (Decide whether the window is on the inside or outside wall or on the vertical wall)

Venetian25mmFaceFixBracket

Then line them up and check to make sure they are even and straight. level meter This is a good way to test.

Using a pencil, mark the holes on each bracket for mounting the nails.

Pencil_01
Pencil_02-1

Now drill the marked holes to the required size using a drill bit.

Drilling

Then nail it to the hole and tighten it properly to the right with the nail.

Bracket

Once all of the above steps are done take yours and mount it exactly as shown in the diagrams below. 

Fix_01
Fix_03-01
Fix_02-01

Once properly mounted, you can hold your blind by pushing the hooks on the brackets as shown in Figures 2 and 3.

Note

By following all the steps mentioned above, you can easily and conveniently install your Venetian Blind on your own and save on the extra installation costs.

Call Us

For More Details: 0711708090